## AN OUTLINE OF THE DEDUCTIVE DEVELOPMENT OF THE THEORY OF THE UNIVERSE OF MOTION
Ever since the dawn of science, the ultimate objective of
the theoreticians in the scientific field has been to devise a
Up to the present time, all of the many efforts along this
line have been fruitless. It has not even been possible to derive the
relations in More than 90% of the conclusions derived from these postulates are in agreement with concurrent scientific thought, and are not contested. Thus, the Reciprocal is not only a general physical theory; it is a general physical theory that, on the basis of present knowledge, is at least 90% correct. It therefore constitutes a significant advance in scientific understanding, irrespective of the judgment that may ultimately be passed upon the remaining 10% of the conclusions derived from the theory. Under the circumstances, many individuals are interested in making a critical examination of the development of thought from the fundamental postulates to the various conclusions in order to satisfy themselves that this development is, in fact, purely deductive. This present work has been designed to facilitate such an examination. In the previous publications which introduced the new theoretical system it was, of course, necessary to devote much of the text to explanation and argument, and even though these works have emphasized the fact that all of the conclusions reached in the theoretical development are derived solely from a determination of the consequences of the postulates, many readers have been unable to follow all of the logical development of the various lines of thought. It is probably that this is due, at least in large part, to a tendency to expect something of a more esoteric nature—some magic formula or all-embracing mathematical expression—rather than the simple “if this, then that” type of deductive developmenet by which the theoretical structure has been constructed. In any event, it has seemed advisable to supplement these previous publications with a presentation which will cover the basic portions of the new system of theory without explanation or argument, and will concentrate entirely on a step-by-step derivation of the pertinent points. This presentation as it now stands (subject to possible extension later) is essentially no more than a sample; it carries the development of theory forward only a few steps. But even this very modest start toward a determination of the consequences of the postulates already brings us to the point where some of the most important features of the physical universe have been duplicated by the theoretical features that have emerged. Already, in this very early stage of the theoretical development, we find that the universe defined by the theory is expanding (as the observed universe does). It contains radiation, consisting of individual particles (photons) which travel outward at unit speed (the speed of light) in all directions from various points of emission, followed a wave-like path (in full agreement with the properties of radiation as observed.) The speed of light, and of radiation in general, in this universe is constant, irrespective of the reference system (as it is in the observed universe). The theoretical universe contains matter, consisting of
individual atoms (as the observed universe does). This matter is subject
to gravitation, which acts instantaneously, without an intervening medium,
and in such a manner that it cannot be screened off or modified in any
way (just as gravitation does in the observed universe, although most
theorists close their eyes to these facts because they cannot account
for them). In this theoretical universe, there are a specific number of
different kinds of atoms with different properties; the chemical elements
(as in the observed universe). These elements constitute a series, each
member of which differs from its predecessor by one unit of a particular
kind, and the series is divided into groups and sub-groups with certain
group characteristics (all of which is in full agreement with observation).
There are additional types of units similar to, but less complex than,
the atoms, which have some, but not all, of the properties of the atoms
(also in agreement with the In the light of this demonstration of how the major features
of a theoretical counterpart of the observed physical universe—radiation,
matter, gravitation, the galactic recession, atomic structure, The manner in which the development of the theoretical structure leads to a unique set of numerical values for each chemical element—a series number, and three rotational displacement values—also shows how the mathematical character of the theoretical universe emerges side by side with the qualitative relationships. Obviously, these sets of numbers are the means by which the elements enter into the mathematical aspects of the many physical relations that appear later in the development, and the simple manner in which they are deduced from the basic premises should serve as an explanation as to why nothing of a more complex mathematical nature than simple arithmetic is needed in the early stages of the inquiry. The fundamental postulates, together with some comments concerning the interpretation of the language in which they are expressed, are stated in Section 1. The statements that follow are sequential; that is, each is a necessary consequence of the statements that have preceded it, either in the postulates themselves, or in previous deductions from the postulates. The justification for asserting that each specific conclusion is a necessary consequence of something that preceded this may not always be obvious, but the objective of the present work is to identify the specific items entering into the system of deductions leading from the postulates to the various theoretical conclusions, and to show how each fits into the deductive pattern. Everything which might tend to divert attention from this objective, such as explanation or argument, has therefore been omitted. In any case where the continuity of thought may not be clear reference should be made to previous publications describing the theory. ## 1. The Basic Relations## Conceptual FundamentalsThis theory introduces two new concepts into physical science:
the concept of The nature of these new concepts can be illustrated by a
consideration of the “expansion of the universe” that is postulated
in the astronomers’ latest theory of the recession of the distant
galaxies. As explained by Paul Davies, “The expanding universe is
not the motion of the galaxies Inasmuch as all galaxies, and the physical locations that they occupy, are moving uniformly outward from all others, each is moving outward in all directions. A motion distributed uniformly over all directions has no specific, or inherent, direction; that is, it is scalar. Thus the expansion can be described as a positive scalar motion of all physical locations (represented as outward in the spatial reference system). Our new theory defines a universe of motion in which scalar motion of physical locations is not a unique phenomenon confined to the expansion recognized by the astronomers, but is the basic form of the motion from which all physical phenomena are derived. ## Basic PremisesThe basic premise of the theory consist of certain preliminary assumptions, a postulate, and a definition. A. In order to make science possible, some preliminary assumptions of a philosophical nature must be made. We assume that the universe is rational, that the same physical laws apply throughout the universe, that the results of experiments are reproducible, etc. These assumptions are accepted by scientists as a condition of becoming scientists, and are not usually mentioned in purely scientific discourse. B. We assume that the generally accepted principles of mathematics, to the extent that they will be used in this development, are valid. C. We postulate that the universe is composed entirely of one component, motion, existing in three dimensions and in discrete units. D. We define motion as the relation between two uniformly progressing reciprocal quantities, space and time. ## Deductive DevelopmentEach of the following statements is a deduction from the
postulate and the preceding statements. The objective of the deductive
development is to determine what can exist in the theoretical universe
defined by the premises of the theory. In most cases it will be evident
that the entity or phenomenon that theoretically 1. Motion, as defined, is measured in terms of speed, the scalar magnitude of the relation between space and time. 2. By reason of the postulated reciprocal relation between space and time, each individual unit of motion is a relation between one unit of space and one unit of time, a motion at unit speed. 3. We define the 4. According to our definition, motion involves a uniform
5. Inasmuch as we postulate that the universe is three-dimensional,
we may represent the scalar progression of space by a line in a stationary
three-dimensional spatial reference system, measuring the corresponding
progression in time by means of a scalar device, a 6. The initial point of the progression of an individual unit of motion is zero. As the distance between two points cannot be less than zero, it follows that the primary motions are necessarily outward, increasing the distances relative to the initial points. 7. This progression is scalar. It is simply outward without any inherent direction. Motion outward from the initial point of the progression is therefore outward from all points of reference. 8. From the foregoing, any two physical locations are progressing outward from each other at unit speed; that is, their separation is increasing at the rate of one unit of space per unit of time. 9. We define the 10. From (8) it follows that the natural system of reference is progressing outward at unit speed relative to the spatial system of reference. 11. We identify unit speed as the
(The various features of the theoretical universe emerge from the deductive development without labels. It is therefore necessary to identify the physical phenomena to which they correspond. The correlation is usually quite evident, as in this instance. In any event, it is self-verifying, as any error would quickly show up in the subsequent development.) 12. Since the postulate specifies that nothing exists other
than discrete units of motion, and the natural reference system is a direct
consequence of the existence of the primary units, this reference system
is the framework, or background, of the universe of motion, and does not
represent any activity 13. We identify the outward progression of the natural reference system relative to the stationary system of reference as the “expansion of the universe” reported by the astronomers.
At this point we have arrived, by deduction from our basic premises, at an explanation of the general background of the physical universe that is essentially in agreement with the astronomers’
14. Once the primary units of motion are in existence, units of inward scalar motion can be superimposed on the outward units. The net magnitude of the two motions is zero, and the combination therefore has no physical properties in a spatial reference system, but it constitutes a base upon which other combinations can be formed. 15. As stated in our definition, motion is a progression.
Thus it is not a succession of jumps, even though it exists only in discrete
units. There is progression within the unit, as well as unit by unit,
simply because the unit is a unit of motion (progression). The significance
of the discrete unit postulate is that discontinuity can occur only between
units, not within a unit. But the various stages of the progression within
a unit can be 16. The continuity of the progression within the units enables
the existence of another type of scalar motion of physical locations.
This is a motion in which there is a continuous and uniform change from
outward to inward and vice versa; that is, a 17. In the two-unit complete cycle of the simple harmonic motion the net change of the spatial position of the physical location is zero. As represented in the spatial reference system, the two-unit combination remains stationary in the dimension of motion. 18. From (10) it follows that the physical location occupied by that motion combination (17) moves outward at the speed of light in a second dimension. 19. The path of the combined progressions then takes the form of a sine curve. 20. We identify such scalar motion combinations as
(This derivation shows why radiation has the properties of a wave as well as those of particles. It is composed of particles (discrete units), but the motion (progression) of these particles is wave-like.) 21. The outward movement of physical locations due to the motion of the natural reference system relative to the stationary spatial system carries with it not only the photons, but also any other physical entities that occupy such locations.
(In addition to the photons, there are certain other massless particles that have no known motion-producing mechanism, and must therefore remain stationary in the natural system of reference, unless acted upon by some outside agency. There are also objects—very distant galaxies—that do have a motion-producing mechanism (gravitation), but are so far away that the gravitational motion toward our location has been reduced to negligible levels. All of these objects behave exactly as required by the theory; that is, they move outward relative to the spatial reference system at the speed of light.) 22. There is no inherent relation between the time magnitudes
involved in the different dimensions of the photon motion. One is the
time of the progression of the natural reference system. The other is
independent of this progression. Thus the 23. The postulate that the universe is three-dimensional
means that three independent magnitudes are required for a complete definition
of each of its basic quantities. Thus three dimensions of scalar motion
are possible. In order to distinguish these purely mathematical dimensions
of motion from the dimensions of 24. Only one dimension of motion can be represented in a three-dimensional spatial system of reference. Each motion shown in such a system is represented by a vector, a one-dimensional quantity having both magnitude and direction, and any combinations of such motions can be represented by the vector sum, which is likewise one-dimensional. 25. A scalar motion has magnitude only, and no inherent spatial direction. It therefore has to be given a direction in order to be represented in a spatial reference system. 26. To give directions to the members of a system of scalar
motions, it is necessary to couple one of the moving locations to the
stationary reference system in such a way that it is represented as motionless.
The directions imputed to the other motions of the system are then determined
by their relation to this assumed motionless
(For example, if we designate our galaxy as A, the direction of the motion of distant galaxy X, as we see it, is AX. But observers in galaxy B see galaxy X as moving in a very different direction BX because they use a different reference point. This contrasts sharply with the directions of the motions of our ordinary experience—vectorial motions—which are the same regardless of the location from which they are being observed. In this vectorial case the direction is the property of the motion.) 27. From (25) and (26), it follows that the factors which determine
the direction of a scalar motion are independent of those which determine
the magnitude. The direction is a result of the nature and location of
the coupling of the motion to the reference system. It may be a 28. From (27), the translational motion of a photon, instead
of being unidirectional, as in (18), may be rotationally distributed in the reference
system. The motion thus distributed, which we will call a 29. From (23), scalar rotation can take place coincidentally in three dimensions. From (24), however, it can be represented in a spatial reference system only on a one-dimensional basis. The magnitudes of the motions in the three dimensions are additive, and can be represented as a total, but the directions of the different distributions cannot be combined. The representation in the reference system therefore indicates the correct magnitude (speed) of the three-dimensional motion, but shows only the directions applicable to the single dimension of the motion that is parallel to the dimension of the reference system. 30. In the absence of any specific restrictive factor, rotationally distributed scalar motions are distributed over all spatial directions. The magnitude of such a motion toward a point in any given direction is therefore inversely proportional to the second power of the intervening distance.
31. Inasmuch as the natural reference system progresses outward at unit speed relative to the spatial reference system, no further increment of outward speed is possible, because of the discrete unit postulate. The net total magnitude of a rotationally distributed linear motion must therefore be inward. 32. If the scalar motion is less than three-dimensional, the basic photon will move outward as radiation in a vacant dimension, and the motion combination will disintegrate. In order to be stable, the rotationally distributed motion must therefore be three-dimensional. 33. The three-dimensional combination of vibrational and
rotationally distributed motions appears in the reference system as an
identifiable object moving inward in all directions. We identify such
an object as an 34. We identify 35. The inward gravitational motion of the atoms results in the formation of material aggregates of various sizes. In these aggregates the atomic motions (and masses) are independent and additive. 36. The outward motion due to the progression of the
natural reference system always takes place at unit speed, regardless
of the size of the aggregate or the distance that is involved (8). The Because of the spherical distribution of the gravitational motion in the reference system, the magnitude of the motion of one unit of matter toward another is inversely proportional to the square of the intervening distance. 37. At relatively short distances gravitation predominates, and the net motion is inward. Since the gravitational motion decreases with distance, while the outward progression remains constant, the opposing motions reach equality at some greater distance, which we will call the gravitational limit. Beyond this distance the net motion is outward, increasing with distance, and approaching unity (the speed of light) at extreme distances.
(This theoretical pattern of net speeds is verified observationally by measurements of the Doppler shift in the radiation received from the distant galaxies.) 38. The conventional spatial reference system in conjunction with a clock for measuring time represents a physical situation in which the space component of the progression of the natural reference system is neutralized by gravitation, while the time component progresses at the full normal rate. In this reference system, the space progression, as indicated by the motion of a massless object, appears as a one-dimensional motion through three-dimensional space. 39. Since we postulate a reciprocal relation between space and time, each of the deductions expressed in the foregoing numbered statements is also valid in the inverse form; that is, with space and time interchanged. 40. We identify the time component of the progression of the natural reference system as the “flow of time” registered on a clock. 41. It follows from (39) that motion in time takes place in three dimensions, in the same manner as motion in space. The time component of the progression of the natural reference system (clock time) is a one-dimensional outward motion through a stationary three-dimensional temporal system of reference, in which independent motions at different speeds and different directions also take place. 42. Motion at unit speed causes unit change of position
in both the spatial reference system and the temporal reference system.
It is a 43. When motion takes place in time, the constant progression analogous to clock time is in space, and would be measured by some kind of a “space clock.” But the rates of progression are the same, one unit of space and one unit of time per unit of motion. Thus the measurements relative to the “space clock” are identical with those relative to a clock that registers time, if expressed in the same units. 44. As noted in (2), the space-time ratio in the units of motion is fixed at unity by the reciprocal postulate. It follows that a reduction of speed—as, for instance, by an increase in the distance between gravitating objects—does not alter the ratio of space to time in the effective motion; it reduces the proportion of the total motion that is effective in increasing the spatial separation of the objects. This effective portion of the motion increases the separation by x units of space per one unit of clock time, where x is a fraction, and because of the fixed relation between space and time in the individual units, also increases the separation in time by x units. 45. Where only one motion is involved, the x units of time are coincident with the time progression, and do not enter separately into the determination of the speed. But if two objects are both moving, their relative position in space may change at a rate exceeding unity by some quantity x. From (44), the change in the separation in time then also exceeds unity (clock time) by x. The speed is (1+x)/(1+x)=1. Thus, if at least one of the two objects is a photon (or other object moving with unit speed), the relative speed is always unity. This agrees with statement (8).
(This is the explanation of the observed fact that the speed of light is independent of the reference system.) 46. Where motion at a speed greater than unity (motion in
time) takes place under conditions that preclude actual changes of position
in time, this motion acts as a modifier of the spatial motion; that is,
a motion in 47. Where scalar motion in space is three-dimensional, the speed in one of the dimensions may be greater than unity. But, as indicated in (29), the effective magnitude of a combination of motions is determined by the net total of the scalar speeds, and because there are two low speed dimensions, the net speed is less than unity. In this case, then, the motion in the high speed dimension acts as a motion in equivalent space, and modifies the magnitude of the change of position in space, rather than causing a change of position in time. 48. We identify the material atoms with scalar rotation in equivalent space as the atoms of the electronegative elements. 49. We also encounter motion in equivalent space within the units of space. Here no modification of the normal progression of space can take place (because of the discrete unit postulate), but motion can take place in time. Inasmuch as this motion within the spatial unit does not alter the position in time of the unit as a whole, the changes within the unit that result from the motion are observed in equivalent space rather than in actual time. 50. The existence of a spatial unit within which motion has properties quite different from those prevailing in the region outside the unit explains the discontinuity in physical properties at very short distances that has led to the development of the quantum theory. 51. The progression of the natural reference system relative to the spatial system of reference is always outward, but, as indicated in (10), the natural datum level, or physical zero, is at unity, rather than at the mathematical zero. Within a unit of space, outward from unity is toward zero. It follows that the progression within the unit, as seen in the spatial reference system, is inward. 52. From (31), the gravitational motion is inward. This direction, too, is inward relative to the natural datum, unity. Within a unit of space, it is therefore outward in the spatial reference system. 53. No stable equilibrium between the atoms or aggregates of matter is possible at separations greater than one unit of space. The inward and outward motions are equal at the gravitational limit, but this equilibrium is unstable, as the change in separation due to any unbalance between the opposing motions increases the unbalance. Within a unit of space, where the directions of the basic motions as seen in the spatial reference system, are reversed, the effect of a change in separation between atoms due to an unbalance of the opposing motions reduces the unbalance, and eventually results in the establishment of a stable equilibrium. 54. The positional equilibrium in equivalent space that is established within a unit of space accounts for the existence of the crystalline state of matter. In the first section of this outline, the general characteristics of the motion of which the universe is constructed, together with additional information about the various forms and manifestations of that motion, were deduced from the postulates of the theory. With the benefit of this information we are now in a position to develop the details of the individual phenomena in the various physical fields. We will begin by identifying the possible combinations of scalar rotations (atoms and sub-atomic particles) and their individual characteristics, including the properties that are represented in the periodic table of the elements. As in Section I, each statement is a deduction from the postulates of the theory or from one or more of the numbered statements earlier in the outline. 55. As noted in (12), the primary motions are the framework, or
background, of the universe of motion, and do not constitute any physical
activity in that universe. Physical activity—that is, meaningful
change—in the physical universe results from motions superimposed
on the primary motions. We will now want to examine the general considerations
involved in such 56. The normal progression, both of the natural reference
system and of the added motions, is a continuous 57. It follows from (44) and (56) that compatible units of motion added in a
dimension of an existing motion will merge with this previously existing
motion, merely altering its magnitude. Formation of a 58. Except where outside forces intervene, the added motion must oppose the original in order to achieve stability. Otherwise there is nothing to hold the components together. The opposition reduces the net total magnitude of the motion, and since lower numbers are more probable than higher numbers, this makes the combination more probable than independent existence of the components. 59. A numerical constraint on the combinations is imposed by the discrete unit postulate. Addition of two inward units of motion to the unit outward progression of the natural reference system produces one net inward unit, the limiting value. The maximum linear addition to a motion combination is thus two units. 60. Where the motion is n-dimensional, the maximum is two
units in each dimension, a total of 2 61. Scalar motion is measured in terms of 62. Where quantities are reciprocally related, the choice
as to which should be called “positive” is purely arbitrary.
It will, however, be convenient to refer to the phenomena of our ordinary
experience as positive. Since the speeds in our local environment are
below unity, we will call a decrease in speed from 63. The photon, as defined in (20), is a vibrating unit that moves outward translationally at the speed of light. As noted in (22), the frequency of the vibration is limited only by the capacity of the production process. The atom, defined in (33) is likewise a vibrating unit with an added linear (scalar) motion, but in this case the linear motion is rotationally distributed over all directions, and the rotational character of the added motion imposes some restrictions on the numerical magnitudes. 64. A one-dimensional scalar rotation (28) of the linear vibrational unit generates a two-dimensional figure, a disk. A scalar rotation of the disk around another axis generates a three-dimensional figure, a sphere. This exhausts the available dimensions. The basic scalar rotation of the atom is therefore two-dimensional. 65. While no further rotation of the same kind (inward)
is possible, the entire combination of motions can be given an 66. The vibrational speed displacement of the basic photon
may be either positive (less than unity) or negative (greater than unity).
For the present, we will consider only those combinations in which the
basic vibrational displacement is negative. We will call this system of
combinations the 67. From (58) we find that where the vibrational displacement is negative the net total rotational displacement must be positive. 68. Where a one-unit positive rotational displacement is
applied to a one-unit negative vibration, the net total speed displacement
(a scalar quantity) is zero. This combination of motions has no effective
deviation from unit speed (the physical datum), and therefore has no observed
physical properties. We will call it the 69. For convenience, we will represent the different motion
combinations of this type of sets of numbers representing the speed displacements
in the three scalar dimensions. We will specify only the 70. To the material rotational base we may add a unit of
positive electric rotational displacement (that is, one unit of effective
one-dimensional scalar rotation), producing M 0-0-1, which we identify
as the 71. Addition of a magnetic (two-dimensional) displacement
unit to the material rotational base produces M ½-½-0. There
are no half units, but a magnetic unit occupies both dimensions, and we
therefore credit half to each. We identify this combination as the 72. At the unit level, the magnetic and electric displacement
units are numerically equal; that is, 1² = 1. Addition of a unit
of negative electric displacement to the muon neutrino therefore produces
a combination with a net total rotational displacement of zero. We identify
this combination, M ½-½-(1), as the 73. Geometrical considerations indicate that two photons—in different scalar dimensions—can rotate around the same central point without interference as long as the rotational speeds are the same, thus forming a double structure. Any rotational combination with two or more net units of rotational displacement can take the double structure. 74. This introduces a new situation: the existence of competing
structures. The aim of our development of the consequences of the postulates
of the theory of the universe of motion is to determine what 75. The double rotational structure is more compact, and therefore more resistant to disruption than the equivalent single structures. This gives it a sufficient margin of probability to preclude the existence of any significant quantity of the competing single structures (unless external forces intervene). 76. We identify the double rotational combinations as 77. The combination ½-½-1 has a total net
rotational displacement of 2, and is excluded by (75). The two-unit magnetic structure M 1-1-0,
and its positive derivative M 1-1-1, which have net displacements of 2
and 3 respectively, are likewise excluded for the same reason. But the
negative derivative M 1-1-(1) can exist as a particle, since its net displacement
is only one unit. We identify it as the 78. A double rotating system with only one net unit of displacement
can be formed by a combination of a rotation of the proton type, M 1-1-(1),
and a rotation of the neutrino type, M ½-½-(1). We identify
this combination, M 1½-1½-(2), as the mass 1 isotope of
79. If the cosmic neutrino type of rotation, C (½)-(½)-1
is substituted for the material neutrino type of rotation in this double
structure, the combination has net total displacements of M ½-½-0.
We identify it as the 80. Because of some significant differences between atoms
and sub-atomic particles, we will use a different system of notation in
representing the atomic combinations. This notation will show the 81. To convert the rotational displacement of the mass 1 hydrogen atom from the sub-atomic notation, M 1½-1½-(2), to the atomic notation, we divide by 2, obtaining 1-½-(1), and then add the initial unit, the result being 1½-1-(1). The net effective displacement, in terms of the double unit is ½. 82. An additional single unit of displacement brings the
total to 2-1-(1). We identify this combination as the mass 2 isotope of
hydrogen. This is the first of the complete two-rotation combinations
(those with effective rotational displacement in both rotations). It is
therefore given the 83. One positive displacement unit (atomic basis) added
to mass 2 hydrogen, 2-1-(1), neutralizes the negative electric rotation,
and produces 2-1-0. We identify this combination as 84. Successive additions of units of positive electric displacement,
or the equivalent, to the helium atom, produce the other members of a
series of atomic combinations, the series of 85. Inasmuch as the two-dimensional (magnetic) rotation is the basic rotation of the atom, as indicated in (64), the magnetic rotation takes precedence over the electric rotation where both are possible. It follows that some of the additions to the atomic series involve magnetic displacement in lieu of electric displacement. If we let n represent the number of double magnetic units of displacement (units of atomic number), the corresponding number of single magnetic units is 2n. When acting jointly in a motion combination, x magnetic units are equivalent to x² one-dimensional (electric) units. The 2n single magnetic units are therefore equivalent to 4n² single electric units. Dividing by 2 to convert the double units of the atomic system, we find that n magnetic displacement units in an atom are equivalent to 2n² electric displacement units. 86. Successive additions of magnetic displacement go alternately
to the two magnetic dimensions, since small numbers are more probable
than larger numbers. One magnetic unit added to helium, 2-1-0, produces
2-2-0, which we identify as 87. Helium already has one effective magnetic displacement
unit in each magnetic dimension. Thus the increase from 2-2-0 involves
a second unit in one of the dimensions. From (85), this second magnetic unit is equivalent to
2 × 2² = 8 electric units. It should be noted that this is
the electric equivalent of the 88. The first four additions of electric displacement units to helium produce the following series of elements:
89. As long as the magnetic displacement—the major component of the atomic rotation—is positive, the electric displacement—the minor component—can be negative without violating the requirement (67) that the net total rotational displacement of a material atom must be positive. Carbon can therefore exist with the alternate displacements of 2-2-(4). Here the Neon type magnetic rotation with net displacement 10 is combined with 4 negative electric displacement units, for a net positive total of 6, the same as the net displacement of the 2-1-4 combination. The probability difference between these two combinations is small, and both are found observationally. Beyond Carbon the probabilities favor the smaller negative electric displacement. The normal forms of the next three elements are therefore:
90. Another group of eight elements follows, bringing the second magnetic dimension up to two effective displacement units at Argon, 3-2-0. A further one-unit increase raises the effective displacement level to 3 units in one of the magnetic dimensions. The third magnetic unit is equivalent to 2 × 3² = 18 electric units. Two 18-unit groups of elements therefore follow, increasing the displacements first to 3-3-0 (Krypton, element 36) and then to 4-3-0 (Xenon, element 54). Finally, there are two groups of 2 × 4² = 32 elements each. The first of these carries the series of 4-4-0 (Radon, element 86). The second would reach 5-4-0 (element 118), but here another factor intervenes. 91. From (60), the maximum three-dimensional scalar rotation has a magnitude of eight units. The significance of this is that at a speed displacement of eight net units, the rotationally distributed progression reaches the same scalar location, the end of the spatial unit, that a linear progression reaches in the same time interval. The next unit of the progression then begins without any limitation on the nature of the coupling to the reference system. In the absence of such a limitation, the motion takes the most probable form, a unidirectional linear progression. This means that at element 118, where the rotational displacements are 5-4-0, and there are a total of eight effective magnetic displacement units (four in each dimension), the rotational combination of motions disintegrates and reverts to the linear basis. The series of chemical elements therefore terminates at element 117. 92. Because the succession of speed displacements follows the definite pattern outlined in (84) to (91), each element can be characterized by a unique set of numbers (subject to some modification under special circumstances). These are the values that enter into the various equations which determine the magnitudes of the different properties of the elements and their combinations. 93. Each successive element in the atomic series adds
one double unit of positive three-dimensional rotational speed displacement
to the combination of motions (the atom). In (34), three-dimensional speed displacement, positive
in the material system, was identified as 94. When physical quantities are resolved into component quantities of a fundamental nature, these component quantities are called “dimensions.” Since we postulate that the physical universe is composed entirely of units of motion, a relation between space and time, the dimensions of all physical quantities (in this sense of the the term) can be expressed in terms of space and time only. From (34), the three-dimensional gravitational motion of the atoms of matter has the dimensions s³/t³, where s and t are space and time, respectively. 95. In order to change the spatial position of an atom,
or an aggregate of atoms, an outward motion must be applied against the
inward scalar motion of the atom. That inherent inward motion then acts
as a resistance to the applied outward motion. In this capacity as a resistance,
or
(This explains why measurements of the “gravitational mass” and the “inertial mass” arrive at the same result.) 96. Having established the space-time dimensions of mass,
we can now define the dimensions of the other physical quantities of the
mechanical system. The product of mass and speed, 97. Physical phenomena with the same dimensions have the same general status in physical interactions, and are interchangeable. For example, all phenomena with the dimensions t/s are equivalent to energy, and can be converted to kinetic energy by appropriate processes. ## 3. Electricity and MagnetismIn this section, we examine the application of the general physical principles developed in Section One to the basic phenomena of another physical field. The field selected for examination in Section Two was chosen to show how the quantitative relations emerge easily and naturally from the mainly qualitative general principles and relations. Now in this third section, we demonstrate the ability of the theory of the universe of motion to clarify the theoretical relations in a field that has heretofore been subject to much confusion. As in the preceding sections, each statement is a deduction from the postulates of the theory or one or more of the numbered statements earlier in the outline. 98. The only difference between the effective component of the electron, M 0-0-(1), and the rotational base, M 0-0-0 (69), is one unit of rotational space displacement. It is therefore a rotational combination with the dimensions of space.
(The term “electron,” as used in this outline refers to the particle defined in (70). Similar particles carrying charges will be identified as “charged electrons.” ) 99. As noted in (97), different physical phenomena with the same space-time dimensions have the same status in physical interactions. From the general physical standpoint, the electron is therefore equivalent to a unit of what we may call extension space, the “space” of our ordinary experience.
(The idea of the equivalent of ordinary space is new to science and may be conceptually difficult for some scientists, but it is the same kind of a concept as the idea of the equivalent of ordinary kinetic energy that we have all become accustomed to. For example, if we wish to put a rocket into orbit, what we have to do is to accelerate it to a certain speed; that is, give it a certain amount of kinetic energy. But, in addition, we must provide enough fuel energy to compensate for the difference in the energy of position—potential energy—and lift the rocket against the earth’s gravity. This potential energy is not “kinetic energy,” but it is “energy,” and in relations involving energy in general it is the 100. From (67), the net speed displacement of the atoms of ordinary matter is positive; that is, in terms of effective units there is an excess of time over space. The electron can therefore move through matter, as the relation of space (electrons) to time (matter) constitutes motion, according to the postulates of the theory of the universe of motion. It cannot move thru space, relative to the natural reference system, as the relation of space (electrons) to extension space does not constitute motion. 101. We identify the movement of electrons through matter as current electricity. It should be noted that the current moves through the matter, not through the spaces between the atoms, as has been assumed. 102. The movement of space (electrons) through matter is identical, except in scalar direction, with the movement of matter through extension space. Thus quantities involved in these motions, and the relations between them, are thus the same in both cases. We may characterize the relations involved in the movement of space through matter as the mechanical aspects of electricity. 103. Since the scalar direction of gravitation (a movement of matter through space) is inward (34), it follows from (102) that the scalar direction of current electricity is outward. 104. The electrons (effective dimensions s) are units of electric quantity, q. The rate at which the electrons move through matter (quantity per unit time) is the electric current, I, with dimensions s/t, equivalent to those of speed. Electrical force, or voltage, V, has the general force dimensions t/s². The product of voltage and current is power, P, with dimensions t/s² × s/t = 1/s. The product of power and time is electrical energy, or work, W, dimensions 1/s × t = t/s. The mass taking part in the current flow is not a constant quantity, but depends on the duration of the current. The mass per unit time, dimensions t³/s³ × 1/t = t²/s³, is therefore a significant quantity in current electricity. We identify it as resistance, R. 105. To demonstrate the identity of the electric current relations (motion of space through matter) with those of the mechanical system (motion of matter through space), we may compare the energy equations. Kinetic energy is ½mv², space-time dimensions t³/s³ × s²/t² = t/s. Electrical energy is RtI², dimensions t²/s³ × t × s²/t² = t/s. Another mechanical expression for energy is force times distance, Fs = t/s² × s = t/s. The analogous electrical expression is voltage times electrical quantity, Vq = t/s² × s = t/s. In both cases the equations are identical, except for the terminology. 106. Since they are phenomena of the same kind, the flow of electrons through a conductor is analogous to the flow of gas molecules through a pipeline. A constant force (voltage) differential causes a steady flow of current.
(This agrees with observation. Existing theory ascribes the flow to a difference in electrostatic potential, which it does not distinguish from voltage. But such a potential difference applied to the charged electron which is assumed to be the moving entity would result in an accelerated motion. Present-day science has no explanation for this contradiction.) 107. From (33), the scalar motion that constitutes the atom
of matter is three-dimensional and inward. The one-dimensional outward
movement of electrons (units of space) through matter, or through a gravitational
field, therefore neutralizes a portion of the gravitational motion and
leaves a scalar motion remnant in two dimensions. The physical effects
of this residual motion are known as 108. The residual motion in two dimensions is perpendicular to the dimension of the motion that is neutralized; that is, perpendicular to the electric current.
(This provides the explanation of the unique direction of electromagnetism that has heretofore been an unexplained anomaly). 109. As the residue of the inward gravitational motion, the electromagnetic motion is necessarily inward. However, the orientation of the scalar direction “inward” with respect to the spatial reference system is reversed when the direction of the current is reversed.
(Conductors carrying current in the same direction move toward each other, while conductors carrying currents in opposite directions move away from each other.) 110. There is no two-dimensional analog of the electric
current because the material system contains no negative magnetic particle.
But the equivalent of a magnetic current, a two-dimensional motion through
matter, can be produced by various means, such as mechanical movement
of a conductor in a magnetic field. This two-dimensional motion neutralizes
a portion of the three-dimensional motion of the matter, and leaves a
one-dimensional residue. If a conductor is appropriately located, this
residue manifests itself as an electric current. The process of producing
a current by this means is known as 111. As noted in (1), motion in general is measured in terms of speed. When represented in a spatial reference system, the motion acquires a direction, and speed becomes velocity. The introduction of directions does not affect the dimensional relations. All of the previous dimensional conclusions stated in terms of speed are equally valid in terms of velocity. 112. From (111) and (96), the product of mass and velocity, momentum, has the dimensions t²/s². This quantity was formerly called “quantity of motion,” an expression which more clearly indicates its nature. It is actually a measure of the total motion of the mass, which consists of n mass units, each having the quantity of motion measured by the velocity. The time rate of change of velocity is acceleration. The time rate of change of the product of mass and velocity, the “quantity of motion,” is force. Thus force is, by definition, the same kind of a property of motion as acceleration. We could appropriately call it “quantity of acceleration.” 113. Since force is by 114. The same considerations apply to the electrostatic force, which, from (112), must also be the force aspect of an electric motion. For an understanding of this motion we return to the question as to the types of scalar motion that can exist in the theoretical universe. Thus far we have encountered three general types: 1) Unidirectional linear motion; 2) Vibrational (simple harmonic) motion, which is linear motion with a continuous change from inward to outward, and vice versa; 3) Scalar rotation, which is a uniform rotationally distributed scalar motion. Obviously, there is a fourth possibility, a scalar rotational vibration; that is, a rotationally distributed scalar motion with a continuous change from inward to outward and vice versa, a rotational simple harmonic motion. 115. An independent rotational vibration cannot exist, as there would be nothing to confine the progression to the rotational path, and it would revert to the more probable linear status. But a unit of rotational vibration can be combined with a unit of rotation. The inward phase of the rotational vibration is coincident with the corresponding rotation, and has no physical effect. The outward phase is an effective rotationally distributed scalar motion opposing the atomic rotation in the dimension, or dimensions, of the rotational vibration. It thus conforms to the requirement for stability, as expressed in (58). 116. From (57), the rotational vibration must not be of the same general nature as the rotation to which it is applied. The effect of this restriction is to bar three-dimensional rotational vibration. The added rotational vibrations may be either one-dimensional or two-dimensional. 117. We identify a rotational vibration as a
(Inability to identify any motion connected with the electric charge is one of the reasons why the theorists have accepted the force exerted by the charge as fundamental, even though this conflicts with the definition of force, as noted in (112). The explanation, as indicated above, is that 118. From (115), the charge must have a carrier, an atom or particle. Independent charges do not exist. 119. From (117), the space-time dimensions of the electric charge are t/s; that is, the charge is dimensionally equivalent (97) to energy.
120. Electric charges may be either positive or negative, but the total displacement is smaller, and therefore more probable, if the displacement of the charge is opposite to that of the rotation. Consequently, a positive rotation takes a negative charge, and vice versa. But in current practice the rotational combinations are designated as positive (or electropositive) if they normally take positive electric charges, and negative (or electronegative) if they normally take negative electric charges. It is not feasible to try to change this firmly established practice, so the usual terminology will be applied in the statements that follow, with the understanding that the significance appertaining to the terms “positive” and “negative” elsewhere in this outline is reversed in application to electric charge. 121. From (26), we find that in order to represent a scalar
motion in a fixed spatial reference system it is necessary to identify
a 122. The motion of a positive charge (a high speed rotational vibration) is outward from a negative reference point toward more positive values, including the positive reference points. That of a negative charge (a low speed rotational vibration) is outward from a positive reference point toward more negative values, including the negative reference points.
(The reference system cannot distinguish between positive and negative reference points. This is another of the difficiencies of the conventional spatial reference system.) 123. From (122), two positive charges move outward from
the same reference point, and therefore outward from each other (7). Two negative charges do likewise, but a positive
charge moves outward from a negative reference point toward all positive
reference points, including the reference point of the negative charge,
and therefore 124. These scalar directions of the electrostatic forces are opposite to those of the corresponding electromagnetic forces (109); that is, like electric charges repel, whereas like currents (those moving in the same vectorial direction) attract.
(This agrees with the theoretical scalar directions of these two types of motion, which are opposite. The electromagnetic motion (109) is inward, while the electrostatic motion (115) is outward.) 125 An electric charge can be applied either against the electric rotation or against one dimension of the magnetic rotation. All atoms and sub-atomic particles of the material system, except the electron, have at least one effective positive displacement unit. With the one exception, all of them can therefore take positive charges. Negative charges are confined to the sub-atomic particles with negative electric displacement, and to the electronegative elements with electric displacement of 4 or less. Those with higher displacements are usually excluded by the greater probability of positive charges based on the lower magnetic displacements. 126. Application of an electric charge to the electron neutralizes
the net negative displacement of the particle. As a neutral particle,
containing both positive and negative components, the charged electron
is able to move either through matter (predominantly time) or through
space. The charged electrons move through matter in the same manner as
their uncharged counterparts; that is, they move freely through good conductors,
less easily through poor conductors, and are blocked or impeded by insulators.
We identify the various phenomena involved in the production and movement
of these charged electrons as 127. Electric charges may also be applied to atoms (existing
individually or in combinations), which are then known as 128. A charge (rotational vibration) may be two-dimensional,
rather than one-dimensional. In that case, it constitutes a 129. Because of the orientation effect noted in (109) which applies to all two-dimensional scalar motion—the scalar direction (inward or outward) of the motion that constitutes the magnetic charge reverses with the direction relative to the reference system. Thus, a magnetic charge exerts an attractive force on a similar charge in one vectorial direction, and a repulsive force on one that is located in the diametrically opposite direction. 130. The force exerted by a magnet is the net total of the
magnetic forces of the individual magnetic charges on the atoms. Each
magnet therefore has two centers or 131. From (130) it can be seen that while a magnetically charged object has only two poles, if that object is separated into parts, each part also has two poles. 132. The existence of magnetic monopoles is excluded by (131).
(Present-day physical theory requires the existence of positive and negative monopoles analogous to positive and negative charges, and continuing attempts are being made to find such phenomena, without success.) 133. As in the case of positive and negative electric charges, and for the same reasons (123), like poles repel each other, while unlike poles attract. 134. Inasmuch as the magnetic charge is the two-dimensional
analog of the one-dimensional electric charge, it has the space-time dimensions
t²/s². The dimensions of the quantities involved in 135. This relation (134) enables us to make a The SI unit is the weber per meter, t²/s² ×
1/s = t²/s³. Corresponding to electric field intensity, t/s³,
is 136. In a number of other cases, the dimensions currently assigned to the magnetic quantities do not agree with those derived from theory in the foregoing manner. Here, the currently accepted dimensional assignments have been based on empirical observations, and the accurate dimensional analysis that is now possible shows that the observations have been improperly interpreted. 137. For example, observations show that magnetomotive
force (MMF) is related to the current, I, by the expression MMF = nI,
where n is the number of turns in a coil. Since n is dimensionless, this
relation indicates that the dimensions of MMF are the same as those of
the electric current. The unit of MMF is therefore taken as the ampere,
dimensions s/t. But MMF has the characteristics of a force (as the name
implies), and the dimensions should be those of magnetic potential, t²/s³.
The dimensional study shows that the discrepancy is due to the fact that
the analog of electric resistance, the 138. When the magnetic relations are corrected by introducing the permeability, and making the necessary adjustments to remove some other errors, the entire system of magnetic quantities is brought into agreement with the mechanical and electrical dimensions. This completes the identification of a comprehensive and entirely consistent system of dimensional relations covering the full range of physical phenomena.
(The demonstrated ability to express the dimensions of all physical quantities in terms of space and time is not only a powerful tool for analyzing physical relations, but also provides an impressive confirmation of the validity of the postulate that the physical universe is composed entirely of these two components.) 139. The most serious error about conventional electric and magnetic theory revealed by the dimensional analysis, is the lack of distinction between electric quantity and electric charge that has resulted from the assumption that the electric current is a movement of charges. In present-day practice, both charge and quantity are measured in the same units—coulombs in the SI system. But the interconvertibility of electric charge and kinetic energy (97) definitely shows that charge has the energy dimensions, t/s, while the relations cited in (104) demonstrate just as definitely that electric quantity has the dimensions of space, s, as required by the theory of the universe of motion. 140. From (139) it follows that there are two distinct kinds
of electric and magnetic phenomena: (1) the 141. Electric charges moving through matter or through a gravitational field are carried by particles or atomic constituents with rotational characteristics similar to those of the particles. The movement of these carriers produces electromagnetic effects, while the charges that are being carried produce electrostatic effects. 142. From (141), an aggregate of charged electrons has both a voltage and a potential.
(This explains the operation of such devices as the Van de Graaf generator, in which charged electrons at a low potential flow into a storage sphere in which the potential may be very high. A flow in this direction would be impossible if, as asserted by present-day theory, only one force, electric potential, is operative. But the foregoing development of theory shows, that there are actually two forces involved, and the direction of flow depends on the voltage differential, not on the potential difference. The voltage in the storage sphere is determined by the electron concentration, and may be low, even when the potential is in the million volt range.) In the preceding Sections, we have presented a step-by-step
deduction from the fundamental Postulates of the 143. At this point, we will need to take into account the
concentration of energy in the vicinity of matter subject to electrical
ionization, and some consideration of the nature of this concentration
will be required. As long as atoms or aggregates are free to move unidirectionally,
there can be no significant spatial (volumetric) concentration of their
kinetic energy. Such a concentration is accomplished by 144. The level of containment outside unit space is measured
by the pressure, the force per unit area, dimensions t/s² ×
1/s² = t/s 145. From (144), it follows that atoms of matter that are not confined, and therefore not subject to any pressure, cannot have temperatures above the very low levels at which they are able to escape from the individual spatial units. Free translational motion of an aggregate of matter likewise has no temperature effect. The motion of this aggregate as a whole is independent of the thermal motion of its constituents.
(Temperatures of millions of degrees are currently reported as applying to individual atoms and molecules in the vicinity of certain astronomical objects. From the foregoing, it follows that these temperature estimates are erroneous. Temperatures of unconfined matter are in the range of a few degrees, not in millions of degrees.) 146. Ionization is produced by a transfer of speed displacement to rotational vibration from some other form of motion, under appropriate circumstances. Thermal motion is one such source. The degree of ionization of the atoms of an aggregate increases with the temperature of the environment in which the aggregate is located, and at extremely high temperatures all elements are completely ionized. 147. From (95), the translational motion of masses, including the confined thermal motion, is outward. From (115), the electric ionization is also outward. Thus a further increase in temperature beyond the level of complete ionization ultimately brings the atoms up to a limiting level at which the sum of the outward ionization and the outward thermal motion is equal to unity. This unit outward motion then neutralizes one unit of the inward rotational motion. As indicated in (91), both units revert to the linear status, converting the rotational vibration and a unit of the rotation to kinetic energy. mass t³/s³ becomes energy t/s. 148. The conversion factor relating a unit of mass to a unit of energy has the dimensions s²/t² (the dimensions of the second power of speed) and unit magnitude. The energy equivalent of a mass is therefore the product of the mass and the second power of unit speed (the speed of light). 149. As to the question of the result of further additions
of thermal motion beyond the limiting point defined in (147) (the 150. Since there are no fractional units of speed, the reduction of linear speeds to levels below unity in the manner described in (44) can be accomplished only by introduction of units of inverse speed. This is motion in time, but the atom is moving gravitationally in space in the other two scalar dimensions, and the net total scalar motion is therefore in space. It follows, in accordance with (47), that the increments of motion in time in the range between zero and unit speed act as motion in equivalent space. 151. Elimination of displacement in space (increase of speed) can continue only up to the unit speed level, at which point all displacement has been canceled. A speed greater than unity therefore cannot be attained by means of this process.
(This is the explanation of the observed inability to accelerate material objects to speeds in excess of the speed of light by application of electrical forces.) 152. As noted in (151), the limit at the unit level is on the capability of the process, not on the speed itself, and it does not preclude an increase in the speed above the unit level by means of a different process. Where speed is available in full units, it may be added directly, up to the absolute limit, which, as stated in (59), is two one-dimensional units. Because an increment of speed above unity is a scalar motion in time (equivalent space), the extension of the linear motion in space into the second unit is distributed over all three time dimensions. As in the rotational situation of (91), the existence of three-dimensional units of speed then makes intermediate speeds between unity and two full linear units possible. 153. The aggregation of matter under the influence of gravitation noted in (34) applies to objects of all sizes. Because of the diversity of conditions there is no uniform aggregation pattern, but since gravitation is omnipresent, the average mass of all major classes of physical objects necessarily increases with advancing evolutionary development—with the evolutionary age, we may say. 154. The process of aggregation results in the conversion of gravitational motion into thermal motion (heat). Coincidentally, there is a loss of heat from the surface of each aggregate, due to radiation. But the mass, which determines the rate of heat production, other things being equal, increases more rapidly than the surface area. The temperature of a large aggregate is therefore a function of the mass, as long as the aggregation process continues. 155. Extremely high temperatures are reached only in
very large aggregates of matter. If the aggregate is large enough to reach
the destructive temperature limit of the heaviest element present, this
activates the process of conversion of mass to thermal energy described
in (147). We identify such an aggregate as a 156. Since the maximum degree of electric ionization of an element is equal to its atomic number (127), the heavier elements have a greater content of ionization energy, and therefore require less thermal energy to reach the destructive temperature limit, the temperature at which the total of these two energy components attains the unit level (149). If the stellar temperature continues rising, the elements reach their destructive limits in the inverse order of their atomic numbers. 157. The principle that small numbers are more probable
than larger numbers applies to the formation of the elements (with some
modifications due to other factors). The heaviest elements are therefore
present in the stars only in relatively small concentrations, and the
energy released in their destruction is dissipated by radiation from the
stellar surfaces. As successively lighter elements reach their destructive
limits, the concentration of the individual element arriving at the limit
increases, and eventually this process reaches an element that is present
in quantities that produce more energy than the radiation mechanism can
handle. The excess energy then blows the star apart in a gigantic explosion.
We identify the overabundant element as
(Here the development of the theory leads directly to an explanation of a phenomenon for which no generally accepted explanation has been derived from astronomical theory.) 158. From (154), the temperature limit of a star is also a mass limit. From (153), the attainment of this mass limit is a result of advanced evolutionary age. The stars that explode as Type I supernovae are therefore mature stars of approximately the same mass. Thus all Type I supernovae have the same general characteristics.
(The astronomers agree that all Type I supernovae are very much alike, but they have no explanation for the similarity.) 159. When the energy released in the supernovae explosion
is added to the already high thermal energy level of the surviving portions
of the interior structure of the star, a substantial portion of the explosion
products are accelerated to speeds in excess of unity, in the manner explained
in (152). From (46)
and (47), the motion of these products
takes place in the spatial equivalent of outward motion in time, which
is inward in equivalent space. The aggregate of these very high speed
products thus undergoes a drastic spatial contraction, and appears to
observation as a small star with a density vastly greater than that of
any aggregate of matter existing in the terrestrial environment. We identify
this high density aggregate as a 160. In ordinary stars (those with component speeds below unity) of a given class, the more massive stars are the larger; that is, they occupy a greater amount of three-dimensional space. From (46), the more massive white dwarf stars occupy the spatial equivalent of a greater amount of three-dimensional time, which is less equivalent space. According to the theory of the universe of motion, the more massive white dwarf stars are therefore smaller than the less massive ones.
161. In ordinary stars the spatial density gradient from the surface to the center of the star is positive; that is, the center is the region of greatest density. From (46), the temporal density gradient of a white dwarf star is also positive, which means that the center of the star is the region of greatest density in time, or least density in the corresponding equivalent space. Thus the spatial density gradient is greatest at the surface, and the lowest at the center. 162. Little or no translational motion in space is imparted to the white dwarf by the supernovae explosion. It therefore remains in the spatial region heavily populated with low speed explosion products, and accretes a substantial amount of these products by reason of its gravitational effect. The surface layers of the younger white dwarfs thus have a composition similar to that of their environment: predominantly hydrogen, with a minor amount of helium, and minute amounts of other elements. Because of the inverse density gradient (161), the hydrogen moves downward preferentially toward the center of the star, leaving the surface layers of the older white dwarfs enriched in helium.
(This, too, is confirmed by observation. A substantial proportion of the white dwarfs are reported to have helium-rich surface layers, extending up to “nearly pure helium atmospheres.” Current astronomical theory has no explanation of this reversal of the normal density relations.) 163. In the supernovae explosion (157), the speeds imparted to the outer portions of the exploding star are less than unity. These explosion products therefore expand outward in space. Their motion is, however, subject to resistance from dispersed matter in the environment, and to the gravitational effect of the exploding aggregate as a whole, including the white dwarf that does not participate in the outward movement. These opposing forces ultimately terminate the expansion and initiate a contraction. Thus most of the ejected matter is eventually recondensed into a star. The typical product of a Type I supernovae is therefore a double star system consisting of a diffuse A component on or above the main sequence and a dense B component (white dwarf or system of planets) below the main sequence.
(This deduction from the premises of our theory 164. Any explosive event comparable in intensity to a Type I supernovae ejects some products at speeds greater than unity. The explanation given in (159) for the extremely high density of the white dwarfs is equally applicable to these other high speed products.
(This accomplishes a significant simplification of astronomical theory, as the currently accepted explanation of the white dwarf density cannot be extended to such extremely dense objects as quasars, pulsars, x-ray emitters, and dense galactic cores, and separate explanations have had to be developed for the density of each of these types of objects.) |